Technical Product Information
A+ Resins is anti-bacteria, anti-fungus, anti-mold and anti-mildew with zero VOC's (volatile organic compound). A+ is hypo-allergenic. In addition, A+ Resins is a fire retardant for 20 minutes giving residential and commercial occupants time to evacuate and the fire department an aid, in response time.
A+ Resins has met and exceeded all tests conducted by the ASTM, American Society for Testing and Materials. A+ received all certifications by the NAICS in the Building Code (NAICS 236220), Masonry Code (NAICS 238140), Painting Code (NAICS 238320), Roofing Code (NAICS 238160), Textile Code (NAICS 313310), and Marine Code (NAICS AP52). A+ is an absolute benefit to any building worldwide.
Benefits and Results:
An anti-bacteria, algae, mold/fungi water-proof product.
Increased adhesive, pencil, psi properties.
Non-toxic, non-carcinogenic; bio-degradable.
No fumes, no vapors, no special ventilation
Fire Spread "A" rating.
Anti-corrosive for interior/exterior coating.
Paint/cement products adhere to most surfaces; i.e.: wood, metal, Styrofoam, cement block etc.
Clean tools, work area with plain water.
Prevents marine growth on vessels, wharfs, and docks.
A+ can be shipped world-wide, smartly packaged in ounce, quart, gallon, 5 gallon, 55 gallon drums, totes, tankers, shipping containers for distribution throughout the United States and all continents.
HID and LED Street Lamps
The LED-HID street lamp is designed to offer state and local governments 62% in savings over regular streetlights. The lamp has no harmful substances and is rated for four times the life of a regular street lamp lasting 40,000 hours compared to only 10,000 hours in the earlier lamps. The lamps offer an astounding crisp light at 120 'LED' watts, guaranteed to be a welcomed advantage to motorist, the world over.
Next on our list, are our other LED bulbs that speak for themselves.
The A-19 LED household bulb boasts 81% energy conservation with a low power consumption and high brightness, yet cool to a baby's touch. There is no UV or IR radiation, and the bulb has a uniform luminance pattern and as stated before, is environmentally friendly. The bulb will lasts up to 20 years.
LED Fluorescent Lamps
The LED fluorescent lamp is extremely bright at only 22 watts and does not contain any harmful mercury as the earlier fluorescents. The bulb offers 31% energy savings, we understand that this is not as high a number when compared to the other LED bulbs, but be assured, is still significant in reducing our 'carbon footprint', our dependency on 'fossil fuel' and our expenses.
Geothermal Heat Pumps - A New Source of Energy
Designed to harness the energy from your own property, geothermal technology uses the heat from beneath the earth's surface. Lines are drilled and installed to capture the heat energy and transport this energy back to 'the pump' that is located in the basement of the home. The 'energy' is used to provide heating during the winter, or cooling in warmer temperatures; in addition to hot water for the home. Electricity costs are the highest when used to provide energy for 'cooling' or 'heating'. By eliminating the use of electricity as a source of heating, cooling, and providing hot water, will effect a savings up to 70%. Now, imagine further savings when coupled with our LED bulbs.
The DEED O.E.M. (Original Equipment Manufacturer) unit shown to the left, is the solution to an overworked and outdated 'Electrical Grid' found throughout Africa and the Caribbean. Problem: The electrical grid is unable to sustain the 'country's load' thereby resulting in frequent power outages and surges destroying or decreasing the life of computer and other important factory equipment. The aged and inefficient grids and transformers result in higher electric costs!!
The equipment replacement costs coupled with 'down-time' and possible loss or delay in factory orders, may and do result in 'lay-offs' to the countries' labour force. The DEED does the deed, it is a low-cost solution to a billion dollar problem. Constant 'surges' in the delivery of electricity is represented by 'peaks' and 'valleys' as if you were looking on a wave measurement. When delivered evenly, electricity would be represented by mild curves with little to no variation. An 'outdated' electric grid and equipment provides an inefficient and uneven flow of electricity resulting in a much higher cost to the end-user. This, in conjunction with the electrical equipment after operating for a period of time becoming 'hot', causes the appliance or factory machinery to utilize more electricity than is needed and decreases the life of the appliance or factory machinery; again accounting for at least 20 to 30% of wasted electricity. The DEED detects equipment that is 'hot' and regulates the amount of electricity to the appliance or factory machinery thereby protecting and increasing the life expectancy of electrical equipment or machinery while recycling and reducing electric cost. Only the DEED corrects this problem 24 hours, 7 days per week.
What Model or Type DEED do I Need?
For every 200 amps, you should purchase a DEED O.E.M. Unit. We are able to design any size DEED unit to meet your facilities' application. Call or email Sean Holman at 347-609-9684 or email@example.com.
Please visit us again as we are constantly updating information on the performance of our LED bulbs and other products. Questions or comments are always welcomed, please go to our 'contact us' page and drop us a line. Have a question, call now 347-609-9684. Follow us on Twitter @decorsenergydev for more ways to save. Thanks for visiting!!